GRIP SET FOR LONG PUTTER, FACE ON OR BELLY PUTTERS, 2-PIECE WRAP, BLACK/WHITE

Description

TWO PIECE LONG OR BELLY PUTTER GRIP SET.
Black/white grips
2 PIECE PUTTER GRIP SETS. WRAP STYLE RUBBER FOR SOFT TOUCH AND DURABILITY.
AVAILABLE AS A SINGLE SET IN THIS LISTING.
BLACK/WHITE COLOR.
TOP GRIP EXCEEDS 5 INCHES, USGA CONFORMING.
LONGER GRIP IS 13 1/4 INCHES
SHORTER GRIP IS 5 7/8 INCHES
I have installed almost 1000 of these grips, here are some tips.
1. I prefer Golfworks grip tape, it is not as sticky as some others I have tried, and the long slide you need here is easier.
2. Cutting the tape to provide a "runway" between the two areas of grip helps to make the slide easier and also eases the removal of the unneeded tape between the two grip sections. A utility knife to cut the tape for removal is what I use. See pictures. (I now use a narrower "runway" than this years old picture shows)
3. You cannot use too much solvent! I have a catch system to recover as much as possible, but lots on the tape, and fully saturate the inside of the longer grip before you slide it on.
4. Shaft note:  Apollo long putter shafts (both 43 and 53 are thick enough down to the 20 inch point to use these grips without build up tape. True temper long putter shafts will need one layer or more of build up tape under the grip tape for the lower grip. If you are adapting some other shaft for your long or face-on putter, keep this in mind.
Thanks to lovely Courtney for adding some beauty to this listing!