FastDry HK-JA05 (110V/120V) JETAirflow Hand Dryer; Brushed Stainless FREE Plug

Description

FastDry Brand
HK-JA05 Jet AIRFLOW High-Speed Hand Dryer
with Stainless Steel Cover with Brushed Finish & FREE Wall Plug (110V/120V)
The JA-Series Jet AIRFLOW hand dryer
(by Hokwang Industries) is FastDry's
entry to the 10 to 15 second, fast-drying classification of hand dryers. The most unique feature of the HK-JA is its variable speed motor and adjustable heating element. With the help of a small screw driver (not included), the owner can adjust the motor speed and heating element with the turn of a hidden screw. Like a dimmer switch in your home, the speed & heat can be set to any point between the maximum and minimum settings. With this one adjustment, the owner can customize the air flow, dry time, sound quality, and energy consumption to fit any application environment. At its highest motor speed and heating element setting, the Model HK-JA is capable of taking the user’s hands from wet to dry in 10 to 15 seconds (3 times faster than traditional dryers). Extremely durable and vandal-resistant, the Model HK-JA05 has a light-weight steel cover. The cover is then brushed to produce a satin-like finish. The brush-type, dual ball bearing motor operates at a range between 12000 and 18000RPM and is capable of producing an air velocity of 14,872 to 19,800 linear feet per minute or 169 to 225 miles per hour (51 to 68CFM air volume) and a temperature increase of 45°F at hand level (approx. 7 inches below nozzles). Both the motor (350 to 700 Watts) and heating element (450 to 900 Watts) are activated automatically by an adjustable infrared sensor
(adjustable range is 2 to 13 inches)
. Dry time varies on the variable setting, but the length of the run time is determined by the user. As soon as the user's hands are removed from under the unit, the drying cycle is terminated. A
n UL approved wall plug (approx. 6ft in length) has been added for additional ease of installation. This option is helpful if an electrical outlet already exists near where the hand dryer is to be installed and a visible chord is not an aesthetic or safety concern. Should the buyer prefer to hard wire the unit through the wall into the back of the dryer, the wall plug can is easily be removed. This unit is new and in its original box.
Mounting instructions and warranty information are included. The FastDry HK-JA05 intelligently combines the flexibility you want with the energy efficiency you need, all while providing the performance your customers demand.
Please Note
:
a
208V - 240Volt
Model is also available
(
without
wall-plug
) & in stock for immediate shipping. There is no additional charge for higher voltage. (
Please see separate listing by this seller for this option; Item No. 150981273472.
)
Dimensions
: 8-5/64" High x 11-19/64" Wide x 7-3/32" Deep;
Weight
: 12.8 lbs.
Electrical Specification
: 110/120 Volts; 6.6 Amps to 13.3 Amps; 800 to 1600 Watts; 60 Hz (
Requires a dedicated 15 Amp circuit
)
5 Year Limited Warranty
against Manufacturer Defects
Underwriters Laboratory, Inc.
(
UL
)
Listed
. (
In both the United States and Canada
)
LEED Credit Eligible
(
for Optimized & Minimum Energy Performance
) and
GreenSpec Listed
.
FREE SHIPPING
via
UPS Ground
to
anywhere
in the
Contiguous United States
.
Expedited shipping available
within
the
Contiguous United States
for an additional fee
(s
ee shipping tab for details.
)
SHIPPING
to Canada available
via
UPS Standard
for an additional fee
(s
ee shipping tab for details.
)