Excel XLERATOR XL-W 110V/120V Hand Dryer High Speed MAKE AN OFFER

Description

Excel XL-W Xlerator (110V/120V) Hand Dryer
with FREE Noise Reduction Nozzle (Upon Request)
with Die-Cast Zinc Alloy Cover & Electrostatically-Applied White Epoxy Finish
SUMMARY
: The 120Volt XLERATOR hand dryer by Excel Dyer can thoroughly dry the user’s hands in only 10 to 15 seconds, providing 3 times faster hand drying power than standard hand dyers.  The XL-W has a white, one-piece, vandal resistant, rustproof cover made of die-cast zinc alloy. All exposed surfaces of the cover are finished with White, chip-proof epoxy paint that has been electrostatically applied. The 5/8HP motor is automatically activated by an infrared sensor; dryer operates as long as hands are under the air outlet.  An air velocity of 14,000 linear feet per minute and an air temperature of 135°F are produced at hand level (4in. below nozzle).  If the available 1.1 Nozzle is installed (free upon request), the velocity and sound will slightly decrease while dry time will slightly increase. Mounting hardware and instructions included.
SPECIFICS
:
In 2002, the warm-air hand dryer landscape was forever changed when the Excel Dryer Co. first introduced the Xlerator hand dryer.  As the world’s first high-speed hand dryer capable of drying the user’s hands in only 10 to 15 seconds, the Xlerator set the new standard for the entire hand dryer industr
y.
But in early 2016, the Xlerator was internally redesigned & made even better.  The motor is now variable speed motor; meaning it can be set to any speed between fastest to slowest.  Sound decreases as speed is reduced & dry time increased.  The heating element is now adjustable with four settings: high, medium, low & off.
With these two variables, the owner can customize the air flow, dry time, sound volume, and energy consumption to fit any application environment.
Both controls are accessible only when the cover is removed.
In addition, this newest generation of XLerators includes a washable metal mesh filter for more reliable performance.  A smart filter sensor is activated should the filter become clogged & is indicated by a visible red LED light.
T
here are six (6) different Xlerator models.  The internals components and performance of all six are identical.  The only difference in the Xlerator models is the material and appearance of the cover.
Specific to the Model XL-W, a zinc alloy is used to form the one-piece, die-cast heavy-duty, vandal-resistant cover.  This light weight cover is both rustproof and unbreakable.
All exposed areas of the cover are coated with chip-proof, electrostatically-applied white epoxy enamel
.
Two tamper-resistant, chrome plated bolts secure the cover to the wall plate/motor base.  The Xlerator uses a powerful “series commutated through-flow discharge vacuum motor/blower” design.
Set to the highest speed (20,000 RPM), this powerful yet extremely efficient 5/8HP motor can produce an air velocity of 19,000 lfm (linear feet per minute) at the nozzle or 16,000 lfm at hand level (approx. 4” below the nozzle).  At this highest speed, a sound level of 80 to 81 dB is generated by the deflection of the high-speed air flow off the user’s hands (but the variable speed motor can be dialed down to the where the sound best suits the owner's preference & installation environment).  Dry time is an amazing 10 to 15 seconds, which is 3 X faster than standard 30-second hand dryers. But the actual length of the run cycle is determined by the user.  The motor and the NiChrome heating element are activated by an infrared optical sensor, and as soon as the user's hands are removed from under the unit, the drying cycle is terminated.  The Xlerator heats the out-flowing air to approx.135°F (from an ambient temperature of 72°F) through a combination of the 970W heating element, friction, and the compression of the air flow.  Mounting instructions and warranty information are included.  Since its introduction, the Xlerator has been often imitated but has yet to be duplicated and remains the standard for high-speed hand dryers.
PLEASE NOTE: The
Excel 40502 Recess Kit is also available from this seller. It
is designed to make the Xlerator high-speed hand dryer (the XL Series) ADA compliant with the 4" protrusion requirement
for
primary walk-way or traffic corridors
.  In other words, according to ADA requirements, no item is allowed to extend out from the wall surface more than 4" if that wall is adjacent to the restroom's primary flow of traffic. Please see Item No.
161145774351
.
Dimensions
:
11-3/4" Wide x 12-11/16" High x 6-11/16"
Deep;
Weight
:
16 lbs.
Electrical Specification
:
110/120 Volts;
50Hz/60Hz
WITH HEATING ELEMENT ON
: 11.3 to 12.5 Amps; 1240 to 1450 Watts
WITH HEATING ELEMENT OFF
: 4
.3 to 4.5 Amps; 460 to 530 Watts
PLEASE NOTE: A higher voltage version (208V - 277V) of the XL-W is also available & in stock for immediate delivery.
Please see separate listings by this seller. No additional cost for higher voltages.
5-Year Limited Warranty
against Manufacturer Defects.
Underwriters Laboratory, Inc.
(UL)
Listed.
(
In both the United States and Canada
)
LEED Credit Eligible
(
for Optimized Energy Performance
) and
GreenSpec Listed.
FREE SHIPPING
via
UPS Ground
to
anywhere
in the
Contiguous United States
.
Expedited
shipping options available (cost calculated based on location & weight).
Shipping
to
Canad
a
available via
UPS Standard
(
cost calculated based on location & weight)
.
Made in the U.S.A.
(
East Longmeadow, MA
)