C130 Magnetic Particle Clutch Configuration: Shaft on two sides Torque Range: 4

Description

C130
Magnetic Particle Clutch
Configuration:
Shaft on two sides
Torque Range:
4 - 130 lb.-in.
Available Coil Voltage:
6, 12, 24, or 90 VDC
Torque range . . . . . . . . . . 4 to 130Maximum RPM . . . . . . . . . . . . . . . 1000Maximum heat dissipation . . . . . . . 80Maximum case temperature . . . . . 160Maximum overhung load . . . . . . . 80Output shaft inertia . . . . . . . 15 x 10-4Response (unforced) . . . . . . . . . . . 130Response (forced) . . . . . . . . . . . . 65Weight . . . . . . . . . . . . . . . . . . . . . . . 22Rated D.C. coil voltages available: 12 VDC (greenleads), 24 VDC (red leads), 90 VDC (blue leads).INSTALLATION INFORMATIONDo not drop, or strike with a hammer. Keep away from finemetal filings and fine metal chips. Shield from liquids.Do not attempt to remove the clutch shafts.All pulleys, sprockets, couplings, etc. must mount as slide fits.Use a puller to remove stuck components. Never pry orhammer to install or remove components.Center your set screw on the flats of the clutch shafts.Always use a flexible coupling when connecting the shafts of arigidly mounted clutch to the shaft another rigidly mounteddevice. Precisely align both shafts.Always electrically ground the clutch.Use the lower curve when approaching a currentvalue from 0 amps. Use the upper curve whenapproaching a current value from 100% ratedcurrent.lb.-in.RPMwattsdegrees Flbs.lb.-in.-sec2mSec.mSec.lbs.